Driveway pavers in Riverside CA - pavers that stay level and tight at the edges
Pavers sinking in the tire tracks or drifting into the lawn? We build on a compacted base with solid edges so they stay put.
Get your paver driveway priced on site
Call (951) 462-2880 or use the form, and I'll look at the ground under your driveway before anyone starts talking paver colors.
What does it take to get a paver driveway in Riverside?
Driveway pavers in Riverside are concrete pavers laid over compacted soil, a compacted gravel base and a sand bed, then held tight by solid edges, so the driveway carries your cars without sinking or spreading.
Most people call us when a cracked concrete driveway has had its day, or when an old paver job has sunk in the tire tracks and spread at the sides. The price mostly turns on the square footage, whether the old driveway has to be torn out and hauled off, the pavers you pick, and whether a slope needs a retaining wall to hold the grade. The schedule turns on the same things, plus any permit the job needs. Your written estimate spells out what we'll build and how, so you can line it up against any other bid you get.
Why Riverside homeowners call Keystone Riverside Concrete and Masonry for driveway pavers
The owner sees your ground
I come out myself to look at the ground and measure, then write the estimate. A lead mason runs our crew on site, so an experienced hand is there when the base goes down.
In business since 2017
I started this company in 2017 after years of commercial block and brick work, where you build to the drawings and an inspector's eye. That's why the part you never see gets our attention first.
Licensed and fully insured
Riverside only grants its permit for driveway work in a street, alley or easement to a state licensed contractor in the right class. If your driveway meets the street, ask every bidder for that license.
The ground under a paver driveway decides how it ages, so let me take a look at yours. Request an estimate or call (951) 462-2880.
How we install driveway pavers
A paver driveway is only as good as what's under it and around it, so that's where our time goes. We dig out, compact the soil, then spread and compact the gravel base, because a soft spot left under there turns into a rut in your tire track later. We set solid edge restraints next, since flimsy plastic edging is how pavers end up wandering into the lawn. Then we spread and level the sand bed, lay the pavers in your pattern, and sweep sand into the joints and run a plate compactor over the top so the pavers settle and lock together against the edges.
Driveways cut into a grade often need a retaining wall along one side, and we build those with the same eye on footing and drainage. If tired brick steps or planters beside the driveway need help, our masonry restoration work can fix them while we're there.
Standard sand-set pavers
Concrete pavers laid on a compacted gravel base and a sand bed suit most driveways. You pick the shape, color and pattern, and the ground work underneath stays the same.
Permeable pavers
Permeable pavers let water soak down through wider joints, and the driveway is ready for cars as soon as the work is done, with no curing wait. They suit a fairly clean site, because mud washing on or dust blowing in can clog the surface fast.
How do you know your driveway needs new pavers?
Ruts in the tire tracks
Pavers dipping where the wheels roll usually means the soil or base under them wasn't compacted well. Leave it and water pools in the low spots, and the dip keeps spreading.
Pavers creeping into the lawn
Gaps opening up and edge pavers tipping outward usually mean the edge restraint gave up, or was never much to begin with. Once the edge goes, the rest loosens from the outside in.
Puddles that won't drain
Water standing on the driveway long after the sprinklers shut off usually points to a base that drains poorly. Water sitting under pavers softens the ground they rely on, so settling speeds up.
Old concrete cracked and lifted
A concrete driveway broken into slabs with lifted edges is usually past patching and catches toes and tires. That's often when pavers make sense, with the old slab torn out first.
What happens when you call about driveway pavers in Riverside?
I come out and measure
You call or send the form, and I come out to look at the ground and measure the driveway. You get a written estimate that says what we'll build and how.
Permits first, then the build
We get any permit the job needs before we start, and street, alley or easement work needs plans the City Engineer has signed. Then our crew builds it, base first.
Inspection and final check
We book any inspections, and on a city permit the inspector contacts us within 24 to 48 hours of the request. I check the work myself before we call it finished.
Paver driveway questions from Riverside
These are the questions people ask me at the end of the driveway. If yours isn't here, call or send the form and ask about your own job.
How much does a paver driveway cost in Riverside, CA?
A sand based concrete paver driveway in Riverside usually runs about $16 to $20 per square foot, including the compacted gravel base and sand bed, with tearing out an existing driveway extra. That's what the work generally costs around here, not our price, and your written estimate gives you the number for your driveway.
Who issues permits for driveway work in the street or an easement in Riverside?
Riverside Public Works issues the construction permit for paving and for building driveways, curbs, gutters or sidewalks in any street, alley or easement in the city. When a job needs a permit we pull it and schedule the inspections, and if it isn't clear whether yours does, we check with the city before we start.
Do I need a licensed contractor to install a paver driveway in California?
Yes, unless the whole job comes in under $1,000, needs no permit and the person doing it has no employees, because that's all California's minor work exemption covers. A driveway job past that line needs a state licensed contractor.
What is the best way to compare paver driveway bids?
Ask each installer how they'll compact the soil before the base goes down and what they'll use to hold the edges. The paver industry's guidance calls soil compaction critical to how the driveway performs, and it rules out flat metal or plastic landscape edging, which gives too little side support, and timber, which warps and rots.
Do I need a drain pipe under my paver driveway?
If your soil is clay or drains slowly, yes, the paver industry's guidance recommends drain pipe under the driveway. The small added cost is returned many times over in extra years of service, so it's worth weighing at your estimate.
How long does a paver driveway keep its looks?
A properly installed paver driveway needs little upkeep and keeps an attractive surface for decades. Cars and feet still bring dirt, stains and wear, so plan on an occasional cleaning.
Get a written paver driveway estimate
Tell us your driveway's rough size in square feet and whether an old driveway has to come out. We reply within one business day to set up a free on-site estimate with no obligation, and I come out to measure.
Paver driveway examples
Work that often goes with pavers
Retaining wall construction
If your driveway cuts into a slope or the yard drops off beside it, a wall holds the soil back so the edge of the pavers stays supported.
Learn moreMasonry restoration
Crumbling brick steps, planters or a porch next to a brand new driveway stand out fast, and repairing them makes the front of the house match again.
Learn more